Stadium High mast pole

High mast light poles are typically much taller than standard light poles and are designed to provide overhead lighting over large areas such as highways, stadiums, airports, and industrial or commercial spaces.

Material: Q345B/A572, Q235B/A36, Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, ST52

Surface treatment: Hot-dip Galvanized and Electrostatic Spraying, Rust Proof, Anti-corrosion performance Class II

Height:15 m – 40 m

Thickness: 5 mm – 12 mm

Wind Resistant: ≥150km/h

Color: Customized

INQUIRY NOW

High mast light poles are typically much taller than standard light poles, ranging from 30 to 150 feet (9 to 46 meters).

The increased height allows for a wider light distribution and the ability to cover a wide area with even illumination.

Overhead lighting is often provided for large areas such as highways, stadiums, airports, and industrial or commercial spaces.

Application

High mast lighting offers many solutions for lighting a variety of venues, including:
Roads and highways, sports venues, warehouses, outdoor parks, playgrounds, etc.

Technical Data Proposal

Material Commonly:Q345B/A572, Q235B/A36, Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, ST52
Height 15M 20M 25M 30M 40M
Dimensions (d/D) 120mm/ 280mm 220mm/ 460mm 240mm/ 520mm 300mm/ 600mm 300mm/ 700mm
Thickness 5mm+6mm 6mm+8mm 6mm+8mm+10mm 8mm+8mm+10mm 6mm+8mm+10mm+12mm
LED Power 400W 600W 700W 800W 1000W
Color Customized Color Customized Color
Surface treatment Hot-dip Galvanized and Electrostatic Spraying, Rust Proof, Anti-corrosion performance Class II
Shape Type Conical pole, Octagonal pole
Stiffener With big size to strength the pole to resist the wind
Powder coating Thickness of powder coating>100um.Pure polyester plastic powder coating is stable, and with strong adhesion & strong ultraviolet ray resistance.Film thickness is more than 100 um and with strong adhesion. The surface is not peeling even with blade scratch (15×6 mm square).
Wind Resistance According to local weather condition, General design strength of wind resistance is ≥150KM/H
Welding Standard No crack, no leakage welding, no bite edge, weld smooth level off without the concavo-convex fluctuation or any welding defects.
Hot-Dip Galvanized Thickness of hot-galvanized>80um.Hot Dip Inside and outside surface anti-corrosion treatment by hot dipping acid. which is in accord with BS EN ISO1461 or GB/T13912-92 standard. Designed life of pole is more than 25 years, and the galvanized surface is smooth and with the same color. Flake peeling hasn't been seen after maul test.
Lifting device Ladder climbing or electric
Anchor bolts Optional
Material Aluminium,SS304 is available
Passivation Available
Production

Send Inquiry
Please enable JavaScript in your browser to complete this form.